Gravel Driveway Calculator

Step-by-Step Guide to Using the Gravel Driveway Calculator

Introduction

This calculator helps you determine the quantity and cost of gravel needed for your driveway project. By inputting specific measurements and selecting gravel type, you can easily estimate both material requirements and cost. Follow these steps to ensure an accurate estimate.

Step 1: Input Driveway Dimensions

• Length (meters): Enter the length of your driveway in meters. This field is required and must be greater than or equal to 0.1 meters. Increase the measurement in increments of 0.1 meters as necessary.
• Width (meters): Enter the width of your driveway in meters. This is also a required field with the same constraints as the length input.

Step 2: Select Gravel Depth

Select the desired depth of gravel for your driveway. This is a mandatory selection, with the following options:

• 50mm (2 inches)
• 75mm (3 inches)
• 100mm (4 inches)
• 150mm (6 inches)

Step 3: Choose Gravel Type

Select the type of gravel you intend to use. The calculator offers several options, each with a different density (kg/m³):

• Standard Gravel (1600 kg/m³)
• Limestone Gravel (1550 kg/m³)
• Granite Gravel (1650 kg/m³)
• Recycled Gravel (1450 kg/m³)

Step 4: Enter Price per Ton

Input the current market price per ton of your chosen gravel type. This is a required field, with a minimum value of $0.01, and you can adjust the amount in increments of $0.01 to reflect the most accurate cost.

Step 5: Review Calculated Results

After entering all necessary information, the calculator will provide you with the following results:

• Total Area: Calculated as length multiplied by width, presented in square meters (m²).
• Volume Required: The total volume of gravel needed, based on the area and depth, reported in cubic meters (m³).
• Weight Required: The total weight of the gravel required, shown in kilograms (kg).
• Weight in Tons: Total gravel weight converted to tons.
• Estimated Total Cost: The total cost, computed from the weight in tons and price per ton, displayed in USD.
• Cost per Square Meter: The cost efficiency of your project in terms of cost per square meter.

Conclusion

Using the Gravel Driveway Calculator, you can easily and accurately estimate the amount and cost of gravel needed for your driveway. This convenient tool ensures you are well-prepared for your project, providing both an understanding of material needs and budgeting clarity. Ensure all data entered is precise to get the most accurate results.