Cv Calculator

The Cv Calculator allows users to calculate flow coefficient (Cv), flow factor (Kv), velocity, and Reynolds number for fluid flow through a valve using inputs like flow rate, pressure drop, specific gravity, and valve size.

Use Our Cv Calculator

Invalid calculator ID.

Guide to Using the Cv Calculator

Introduction

The Cv Calculator is designed to help you determine the flow coefficient, or Cv value, which is crucial for sizing valves in a piping system. This tool uses parameters like flow rate, pressure drop, specific gravity, and valve size to provide an accurate assessment. Follow the steps below to use the calculator effectively.

Step 1: Provide Flow Rate

Flow Rate (Q): Enter the flow rate in cubic meters per hour (m³/h). Make sure this value is between the required minimum of 0.01 and maximum of 1000.

Step 2: Enter Pressure Drop

Pressure Drop (ΔP): Input the pressure drop across the valve in bar. This value should be within the range of 0.01 and 100.

Step 3: Specify Specific Gravity

Specific Gravity (SG): Provide the specific gravity of the fluid. This should be between 0.1 and 10, and you can use increments of 0.01.

Step 4: Choose Valve Size

  • Select the appropriate valve size from the dropdown menu:
  • DN15 (1/2″)
  • DN20 (3/4″)
  • DN25 (1″)
  • DN32 (1-1/4″)
  • DN40 (1-1/2″)
  • DN50 (2″)

Step 5: Calculate Results

After filling in all the required fields, the calculator will compute the following results:

  • Cv Value: Calculated using the formula flowRate * sqrt(specificGravity / pressureDrop). This is presented as a number with two decimal points.
  • Kv Value: Derived from the Cv Value as cvValue * 0.865. Displayed as a number with two decimal points.
  • Velocity (m/s): Computed using flowRate / (3.6 * pow((valveSize / 1000), 2) * 0.785). The result is shown in meters per second to two decimal places.
  • Reynolds Number: Calculated with velocityMetersPerSecond * (valveSize / 1000) / (0.000001 * specificGravity) and rounded to the nearest whole number.

Conclusion

The Cv Calculator provides essential calculations for assessing valve sizes based on given flow rates, pressure drops, and other specific conditions. Ensure all inputs are accurate within their specified ranges for precise results. With this tool, engineers and technicians can efficiently determine the appropriate valve sizing and performance metrics.